PRELIMINARYTD 92476GB2008-06-12/ Ver. PA11User ManualCordless Telephone DT390206.3.3 Dial a Number from the Local Phonebook1 Open the menu by pressing the confirmation button, or the Soft key "Menu".2 Select "Contacts".3 Select "Call contact".4 Select contact from list, or search name/number by entering characters and selectsearch.5 Press the Soft key "Call" or the Off-hook key to make the call.6.3.4 Dial a Name from the Central Phonebook1 Open the menu by pressing the confirmation button, or the Soft key "Menu".2 Select “Contacts”.3 Select "Central phonebook".4 Select "Search by name".5 Enter the first name and/or last name, the whole name does not have to beentered.6 Press “Search”.7 Press the soft key "Call" or Off-hook key to make the call.6.4 During A CallNote: Some of these functions are system dependent. The parameters are set up in thePortable Device Manager (PDM), see Configuration Manual, Cordless telephone DT390,TD 92532GB, and Installation and Operational Manual, Portable Device Manager (PDM),Windows version, TD 92325GB.6.4.1 Adjust the Volume during a CallUse the navigation key, and to adjust the volume.6.4.2 Open Contacts during the CallPress the soft key "More" during the call, and select "Contacts". Press "Select". See 7.2Contacts on page 26.6.4.3 Turn the Microphone on/off during a CallPress the soft key "More" during the call, and select "Microphone off". Press "Select".The indicate a silenced microphone. This means that the other part in an ongoingcall cannot hear you. To turn the microphone back on, press the soft key "More" duringthe call, and select "Microphone on". Press "Select".It also possible to turn the microphone off/on by a long press on .6.4.4 Start a New Call during ConversationPress the soft key "More" during the call, and select "New Call" 1 . Press "Select".Dial the number and press .1.Visible if defined in the PDM.