Aastra DT4X3 User Manual

Also see for DT4X3: User manual User guide User guid

Contents

Aastra DT4X3 User Manual Manual pdf 50 page image

1424-EN/LZT 103 089 A3 2012-02-23User ManualCordless Phones for MX-ONE™448.1.7 Call a PTT GroupNote: PTT group(s) must be defined in the PDM and Messaging Group(s) in CPDM3 to be ableto use this function. See the handset’s Configuration Manual, and Installation and OperationManual for CPDM3.1 Press "Menu".2 Select in the menu.3 Select "PTT groups" 8 .4 Select PTT group.5 Press "Call", or .TIP: Alternatively, when in idle mode, press quickly, select PTT group, and press8.1.8 Re-join a GroupRe-join a Group from Call ListIf a PTT invitation was received as a call and the user rejected or missed it, the PTT group canbe dialed from the Call list or Missed calls, respectively. The PTT invitation is indicated by theicon in the list. See 8.1.1 Call List on page 40, or 8.1.2 Missed Calls on page 42.8.2 Optional Call handling ServicesThese functions are system dependent and may not be available in your telephony system.Besides the default Call services functions, it is possible to define 10 extra system specific callservices - with or without automatic disconnection. The parameters are set up in the WinPDM /CPDM3. Please contact your system administrator.8.2.1 Absence HandlingThe reason for being absent and the return time can be specified here. If you are authorized, youcan also enter Absence information for another extension from your own extension.1 Enter the menu by pressing the “Menu” soft key.2 Select in the menu.3 Select "Call services".4 Select "Absence" 9 .5 Select the applicable absence reason in the list. The number of absence reasons (forexample “Lunch”, “Meeting”, “Trip” etc.) are configured in the WinPDM(CPDM3.6 Press "Select.7 Enter time (HHMM) or date (MMDD) depending on the selected absence reason.8 Press "OK".The handset sends an absence reason code to the system by establishing a call. The call willautomatically be disconnected after a few seconds.Note: The following procedure can also be used: Press*23* enter the Absence code (0-9) Press*, enter time or date of return (MMDD/HHMM), if requested, Press # and press and ,(U.S and Canada, Press *24*).8.Only available if PTT group(s) is defined in handset via PDM.9. Only visible if absence reason codes are defined in handset via PDM/CPDM3.