Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/ENTo install sets and cartridges in the i7XX range 05/2008 Page 5-495.6.4 Installation5.6.4.1 ConnectionsRefer to the network connection diagram in section 12.2.3.If required, refer to the mains connection diagram, section 12.2.4.5.6.4.2 ConnectionTo the LAN: using a Ethernet cord not supplied (remote supply possible via the LAN).Set of 10 Ethernet cables:HT1455A.To the telephone handset: by a coiled cable with an RJ9 type male connector at each end.To the headset: see Section 12.3.1.To the mains: using a power supply unit (PN1120A) if power is not remotely supplied to the set viathe LAN.5.6.4.3 Default settings on deliveryKey sound :Yes Level :4Ring: 4 Level:4Handset volume Level :5Speaker volume Level :6Headset Microphone volume Level :5Keypad:-Qwerty (English + others)-Azerty (French + French-speaking countries)Direct call: Int.Display:-Contrast: 8-Saver timeout: 15 min.
