7Attaching the stand in thewall mount position1. Bring the line cord through the openingin the stand, then lower the stand intothe slots on the base.2. Slide the stand into the locked position,as shown below.* We recommend that you use a wall mounting plate(available at your phone retailer). If wall mountingwithout a plate, use the stand as a template forpositioning screws in the wall.3. Plug the line cord into the wall jack. Lineup the screws on the wall mount platewith the openings in the stand and slidethe phone down until the mountingscrews hold firmly.4. Continue routing the cords in thechannels on the stand.5. Remove the tab from the base andreinsert it with the point up. Makesure the tab is in all the way. Hangthe handset on the tab. If the chargelight does not light up, and the handsetis switched on, the tab has not beenlocked into position.6. Pull the base antenna vertical andextend it all the way up.*CharRetirerRemove