Operational, Basic, and Advanced Parameters41-001129-00 Rev 09, Release 1.4.1 A-5Configuration ParametersAppendix AOperational, Basic, and Advanced ParametersThe following sections provide the configuration parameters you can configure onthe IP phone. Each parameter table includes the name of the parameter, adescription, the format, default value, range, and example. The table also providesthe method for which the parameters can be configured (IP phone UI, Aastra WebUI, or configuration files).Network SettingsParameter –dhcpDHCP(in Web UI)IP phone UI Options->Network SettingsAastra Web UI Advanced Settings->NetworkConfiguration Files aastra.cfg, .cfgDescription Enabling DHCP will populate most of the network information. The DHCPserver should serve the network information that the IP phone requires. Ifthe IP phone is unable to get any required information then it should beentered manually. Parameters affected: ip. Use "0" to disable DHCP and"1" to enable DHCP.Format IntegerDefault Value 1Range 0 or 1Example dhcp: 1Parameter –ipIp Address(in Web UI)IP phone UI Options->Network SettingsAastra Web UI Advanced Settings->NetworkConfiguration Files aastra.cfg, .cfgDescription This parameter assigns a static IP address to the IP phone device.Format IP addressDefault Value 0.0.0.0Range Not ApplicableExample ip: 192.168.0.25
