Abatron BDI1000 User Manual
Also see for bdiAccess BDI1000: Installation manual
                                      | |
Contents
| 
bdi RDI JTAG interface for RDI Debuggers, BDI1000User Manual 36© Copyright 1999-2003 by ABATRON AG V 1.10B MaintenanceThe BDI needs no special maintenance. Clean the housing with a mild detergent only. Solvents suchas gasoline may damage it.If the BDI is connected correctly and it is still not responding, then the built in fuse might be damaged(in cases where the device was used with wrong supply voltage or wrong polarity). To exchange thefuse or to perform special initialization, please proceed according to the following steps:Observe precautions for handling (Electrostatic sensitive device)Unplug the cables before opening the cover.Use exact fuse replacement (Microfuse MSF 1.6 AF).!123BDI1000AAAAbbbbaaaattttrrrroooonnnn AAAAGGGG SSSSwwwwiiiissssssss MMMMaaaaddddeeee1.1 Unplug the cables2.1 Remove the two plastic caps that cover the screws on target front side2.2 Remove the two screws that hold the front panel3.1 While holding the casing, remove the front panel and the blue elastig sealing(e.g. with a small knife)front panelelastic sealingcasingTARGET A TARGET BBDITRGTMODE |
Related manuals for Abatron bdiAccess BDI1000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine