Abatron BDI2000 User Manual
Also see for 7440: User manual
                                                   | |
Contents
| 
bdiGDB for BDI2000 (PowerPC 7440/7450/86xx) User Manual 49© Copyright 1997-2015 by ABATRON AG Switzerland V 1.13B MaintenanceThe BDI needs no special maintenance. Clean the housing with a mild detergent only. Solvents suchas gasoline may damage it.If the BDI is connected correctly and it is still not responding, then the built in fuse might be damaged(in cases where the device was used with wrong supply voltage or wrong polarity). To exchange thefuse or to perform special initialization, please proceed according to the following steps:Observe precautions for handling (Electrostatic sensitive device)Unplug the cables before opening the cover.Use exact fuse replacement (Microfuse MSF 1.6 AF).!1231.1 Unplug the cablesBDI TRGT MODE BDI MAIN BDI OPTION2.1 Remove the two plastic caps that cover the screws on target front side2.2 Remove the two screws that hold the front panel3.1 While holding the casing, remove the front panel and the red elastig sealing(e.g. with a small knife)front panelelastic sealingcasing |
Related manuals for Abatron 7440
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine