Abicor Binzel ABITIG GRIP Series Operating Instructions Manual

Also see for ABITIG GRIP 1502: Original operating instructions

Contents

Abicor Binzel ABITIG GRIP Series Operating Instructions Manual Manual pdf 16 page image

EN - 64 Putting into operation TIG welding torchEquip the torch neck according to the following figure:4.2 Shortening the tungsten electrodeThe electrode type is set by EN ISO 6848. The maximum electrode lengthdepends on the torch type.4.3 Connecting the cable assembly1 Plug the hose assembly connection into the power source and secure it witha connection nut.2 Properly mount the connections for water supply/return, shielding gas andcontrol line plug.1 Torch body2 Gas nozzle3 Tungsten electrodes4 Back cap5 Electrode holderFig. 1 Step 1-4Step 1 Step 2-3 Step 415 34 2NOTICE• Instead of the electrode holder, you may also use a gas diffuser. Due toits design, it will produce a laminar gas flow.NOTICE• The welding performance is affected by the selection of the tungstenelectrode and by wear. A smooth, groove-free sharpened end of thetungsten electrode has a positive effect on the welding result.