41Important PrecautionsWarning: Read all instructions in the user manual before using the product.Take good care of user manual, do not throw it away.When using an electrical product, basic precautions must be taken to avoid fire, electricshock or material and personal injury. The treadmill should only be used as described in thismanual. It is the owner`s responsibility of that all users of the product are aware of, andfollow with the precautions described in this manual.Connection and grounding instructionsWarning: The product may only be connected to the properly grounded electricaloutletThis product must be grounded. If a ground fault occurs, any hazard will then be reduced ifthe product is connected to a grounded plug. Connection to grounded plug also reduces thepossibility of static charges that can cause static shock, electromagnetic noise, and damageto electrical components.The product is equipped with cable with grounding conductor and grounded plug. The plugmust be connected to a suitable electrical outlet that is installed and grounded accordingly tolocal regulations. The plug must not be modified in any way, if the plug does not fit theelectrical outlet, suitable outlet must then be installed by a qualified electrician.The product should be used on a nominal 220-240 volt course with grounded plug. Weadvice that the product should be used on a dedicated course, it is recommended 16 Ampscourse for treadmills. Avoid using extension cord.Before useing the producktPlacing your treadmillThe treadmill must stand on a flat and stable surface. It is recommended to have 2 metersclearance behind the treadmill, 1 meter on each side and 30 centimeters in front to fit thepower cord and to put the treadmill in storage position.Part Recomended maintenance How often? Cleaning LubricationDisplay Clean with a soft, clean and moist cloth. After use No NoFrame Clean with a soft, clean and moist cloth. After use Water NoRunning belt Clean with a soft, clean and moist cloth. Weekly No NoRunning deckClean with a soft, clean and moist cloth. Make sure that it has sufficientapplied lubricant and the surface is smooth. Weekly No Yes*Drive beltInspect that the drive belt is sufficiently tight, check for any wear andthat drivebelt is in the correct position. Monthly No NoBolts, nuts etc. Inspect all bolts, nuts and screws. Thighten if necessary. Monthly No No* Always use the manufacturer's recommended lubricant