Ability 510M User Manual
Contents
|
14 The Ability systemUser’s manual2-6KeysThe Ability system is capable of managing contact-free digital-keys, whichare available in three versions:• AbKey - proximity tag• AbCard - proximity card• Air2-KF100 - wireless keyfobEach key is unique and is identified by a random code selected from over 4billion code combinations. During the installation phase, each key isenrolled on the system in order to allow it to operate.Each key is characterized by the following parameters (programmed byyour installer) in accordance with the requirements of the key user.• Partitions - User codes can control only the partitions they areassigned to. If a key is used at a reader, it can operate only on thepartitions the two devices have in common. For example, if the keycontrols partitions 1, 3, and 5 and the reader controls partitions 1, 2and 6, the key can operate on partition 1 only, as it is the only partitionthe key and reader have in common. If a keyfob button is pressed, theuser will be allowed access only to the partitions the wireless keyfob isassigned to.• Up to 4 Shortcuts.• A Timer can be set up to restrict the use of a key. The system will allowthe key to operate the system only when the Timer is active. In thisway, the user will be unable to access the system at all other times.• Patrol attribute - This option is usually enabled on keys used bysecurity personnel or night watchmen who must patrol the protectedpremises at regular intervals. This type of key does not allow the user toselect the “Arm Type”. On acceptance of a Patrol key, the system willcarry out the following actions:1. disarm the partitions common to the key and reader concerned2. activate the respective Patrol Time for the partitions concerned;3. re-arm the partitions (as before) when the Patrol Time expires.If the patrol key is held in the vicinity of the reader while the Patrol Timeis still running (for example, if the inspection ends ahead of time), thePatrol Time will end immediately and the partitions will arm as before.• Service option - On acceptance of a key with this attribute, the systemwill deactivate any outputs associated with Zone alarm/tamper andPartition alarm/tamper events (on the Partitions the key and readerhave in common). This type of key can select the reader shortcuts andits customized (personal) shortcuts.2-6-1Air2-KF100 Wireless keyfobsThe KF100 keyfob has 4 remote-control buttons which can each beprogrammed with a shortcut (ask your installer for details). The graphic-choice feature allows you to identify the buttons by numbers or icons.The keyfob also provides 4 button-associated LEDs and a confirmation LED.As a result of two-way communications with the BS100 transceiver, theKF100 keyfob imparts audible and visual feedback signals (beep and LEDsignals) which notify the user of the outcome of requested operations.Technicalspecifications KF100 ValueBattery 3V CR2032 Lithiumbattery (included)Buzzer MultitoneRubber pushbuttonversion- with icons- with numbersTable 7: Feedback signals provided by KF100 wireless keyfobPushbutton Icon LED 1 LED 2 LED 3 LED 4 Buzzer signal Operation1 flash beep Shortcut activation 11 flash beep Shortcut activation 21 flash beep Shortcut activation 31 flash beep Shortcut activation 4+ + 1 flash 1 flash beep Block wireless keyfobany 4 flashes 4 flashes Keyfob blocked |
manualsdatabase
Your AI-powered manual search engine