3-12 Chapter 33-5. Power Management SetupACPI Suspend Type:This item selects the type of Suspend mode.[S1(POS)]: Enables the Power On Suspend function.[S3(STR)]: Enables the Suspend to RAM function.[Auto]: Automatically select the type of suspend mode.USB Dev Wake-Up From S3:When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3(STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is setto [S3(STR)].Power Management:This item allows you to select the type (or degree) of power saving and is directly related to the followingmodes: (1) Suspend Mode and (2) HDD Power Down.There are three options for power management, two of which have fixed mode settings:• User Define: “User Define” defines the delay for accessing the power modes.Suspend Mode: Disabled 1 Min 2 Min 4 Min 8 Min 12 Min 20 Min 30 Min 40 Min 1 Hour. The default setting is Disabled.HDD Power Down: Disabled 1 Min 2 Min 3 Min 4 Min 5 Min 6 Min 7 Min 8 Min 9 Hour 10 Min 11 Min 12 Min 13 Min 14 Min 15 Min. Thedefault setting is Disabled.• Min Saving: When these two saving modes are enabled, the system is set up for minimum powersavings.Suspend Mode = 1 HourHDD Power Down = 15 Min.• Max Saving: When the two saving modes are enabled, the system is set up for maximum powersavings.BD7-E