Abit BH6 User Manual
Also see for BH6: User manual
                                                                                                  | |
Contents
| 
Quick Installation A-1Appendix A Quick InstallationAppendix A will give you a simplified installation procedure, in order to allowyou to install your motherboard quickly and correctly.If you need further information or if you need to change some other settings,start reading from Chapter 1.Mount the retention mechanism onto Slot 1, then fix the screw on the fourcorners of the mechanism. Slightly and gently insert the Pentium® II/IIIprocessor into the retention base, make sure all the components are affixedsecurely.According to your CPU speed, set up the CPU in the CPU SOFT MENU™ IIof the BIOS SETUP.DIMM 1 ~ DIMM 3Watch the pin position and the orientationFDC: Connect one end of the 34-pin cable that comes with the drive to theFDD connector, and the other end of the cable to the FDC pin connector on themotherboard.Note: Be sure that the red line on the cable connects to the first pin of theconnectors.Watch the pin position and the orientationIDE1 (Primary IDE): Connect one end of the 40-pin cable that comes with thedrive to the HDD connector, and the other end to IDE1 pin connector on themotherboard.Note: Be sure that the red line on the cable connects to the first pin of theconnectors.Installing the CPUAdjusting CPU speedInstalling DRAMInstalling FDDInstalling HDD |
Related manuals for Abit BH6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine