Abit BX6 Pentium II User Manual
Also see for BX6: User manual
                                                                                      | |
Contents
| 
Introduction of BIOS 3-11Boot Up Floppy Seek:When computer boots up, the BIOS detects if the system has FDD or not.When this item is enabled, if the BIOS detects no floppy drive, it will displaya floppy disk drive error message. If this item is disabled, the BIOS will skipthis test.Boot Up Num Lock Status:‰ On: At boot up, the Numeric Keypad is in numeric mode.‰ Off: At boot up, the Numeric Keypad is in cursor control mode.IDE HDD Block Mode:This item can be set as Enable or Disable.Most of new hard disk drives (IDE drives) support multi-sector transfers.This feature speeds up hard disk drive access performance and reduces thetime necessary to access data. When this item is enabled, the BIOS willautomatically detect if your hard disk drive supports this feature or not, andwill choose the right settings for you. ( The default is disable )2 For further details about hard disk drive installation, refer to appendix B.Typematic Rate Setting:This item allows you to adjust the keystroke repeat rate. When enabled, youcan set the two keyboard typematic control that follow (Typematic Rate andTypematic Rate Delay). If this item is disabled, the BIOS will use the defaultsetting.Typematic Rate (Chars/Sec):When you press a key continuously, the keyboard will repeat the keystrokeaccording to the rate you have set. (Unit: characters/second °^Typematic Rate Delay (Msec):When you press a key continuously, if you exceed the delay you have sethere, the keyboard will automatically repeat the keystroke according acertain rate. (Unit: milliseconds) |
Related manuals for Abit BX6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine