Abit BX6 User Manual
Also see for BX6: User manual
                                                                                                       | |
Contents
| 
Quick Installation A-1Appendix A Quick InstallationAppendix A will give you a simplified installation procedure, in order to allowyou to install your motherboard quickly and correctly.If you need further information or if you need to change some other settings, startreading from Chapter 1.Installing the CPUMount the retention mechanism onto Slot 1, then fix the screw on the four cornersof the mechanism. Slightly and gently insert the Pentium® II/III processor into theretention base, make sure all the components are affixed securely.Adjusting CPU speedAccording to your CPU speed, set up the CPU in the CPU SOFT MENU™ II ofthe BIOS SETUP.Installing System MemoryYou can install the SDRAM module (168 pin DIMM module) to the DIMMsockets (DIMM 1~DIMM5), the maximum memory capacity of this motherboardis 1GB.Installing FDDWatch the pin position and the orientationFDC: Connect one end of the 34-pin cable that comes with the motherboard orthe drive to the FDD connector, and the other end of the cable to the FDC pinconnector on the motherboard.Note: Be sure that the red line on the cable connects to the first pin of the connectors.Installing HDDWatch the pin position and the orientationIDE1 (Primary IDE): Connect one end of the 40-pin cable that comes with themotherboard or the drive to the HDD connector, and the other end to IDE1 pinconnector on the motherboard. |
Related manuals for Abit BX6
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine