Abit IC7-G User Manual
Also see for IC7-G: User manual
                                                                                                | |
Contents
| 
BIOS Setup 3-17 UR2 Duplex Mode:This item selects the duplex mode required by the IR device connected to the IR port. Full-duplex modepermits simultaneous two-direction transmission. Half-duplex mode permits transmission in one directiononly at a time. Refer to your IR KIT user's guide to find out which setting is correct.Onboard Parallel Port:This item specifies the I/O address used by the parallel port.[Disabled]: This option prevents the parallel port from accessing any system resources. When the valueof this option is set to [Disabled], the printer port becomes unavailable.[378/IRQ7]: This option allows the parallel port to use [378/IRQ7] as its I/O port address. The majorityof parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.[278/IRQ5]: This option allows the parallel port to use [278/IRQ5] as its I/O port address.[3BC/IRQ7]: This option allows the parallel port to use [3BC/IRQ7] as its I/O port address. Parallel Port Mode:This item specifies the parallel port mode.[Normal]: Allows the standard parallel port mode to be used.[SPP]: (Standard Parallel Port) Allows bi-directional parallel port operation at normal speed.[EPP]: (Enhanced Parallel Port) Allows bi-directional parallel port operation at maximum speed.[ECP]: (Extended Capabilities Port) Allows bi-directional parallel port operation at a speed faster thanthe normal mode’s data transfer rate.[ECP+EPP]: Allows parallel port operation at ECP and EPP mode. EPP Mode Select:This item selects the EPP mode. ECP Mode Use DMA:This item selects the DMA channel of the parallel port. Onboard PCI Device:Click |
Related manuals for Abit IC7-G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine