Quick Installation A-1Appendix A Quick InstallationAppendix A will give you a simplified installation procedure, in orderto allow you to install tour mainboard quickly and correctly.If you need further information or if you need to change some other settings,read from Chapters 1.Lift up the lever of the CPU socket, insert yourCPU on the socket, and lower the lever back in position. Don’t worry, if youdon’t respect the correct orientation, you will not be able to insert the CPU.According to your CPUvoltage and speed, set up the CPU in the CPU SOFT MENU™ of the BIOSSETUP. For information about your CPU, refer to appendices B, C or D, andto information labeled on the CPU itself.SIMM1~SIMM4,DIMM1~DIMM2- SincePentium are 64-bit CPUs, you have to use two 72-pin DRAM modules, orone 168-pin DRAM module. Refer to the scenarios listed below to install yourDRAM modules.Scenario 1: Two identical 72-pin DRAM modules:Insert your DRAM modules into SIMM1 and SIMM2memory banks.Scenario 2: Four identical 72-pin DRAM modules:Insert your DRAM modules into SIMM1, SIMM2,SIMM3 and SIMM4 memory banks.Scenario 3: Four DRAM modules, identical by pairs:Insert two identical DRAM modules into SIMM1 andSIMM2, and the other two identical DRAM modulesinto SIMM3 and SIMM4.Installing the CPU:Adjusting CPU voltage and speed:Installing DRAM: