Abit IT5E Series User Manual
Also see for AB-IT5H: User manual
                                                                                                  | |
Contents
| 
3-14 Chapter 3not. When this item is enabled, if the BIOS detects no floppy drive, itwill display a floppy disk drive error message. If this item is disabled,the BIOS will skip this test.Boot Up NumLock Status:‰ On: At boot up, the Numeric Keypad is in numeric mode.‰ Off: At boot up, the Numeric Keypad is in cursor control mode.IDE HDD Block Mode:This item can be set as Enable or Disable.Most of new hard disk drives (IDE drives) support multi-sectortransfers. This feature speeds up hard disk drive access performanceand reduces the time necessary to access data. When this item isenabled, the BIOS will automatically detect if your hard disk drivesupports this feature or not, and will choose the right settings for you.2 For further details about hard disk drive installation, refer to appendixE.Typematic Rate Setting:This item allows you to adjust the keystroke repeat rate. Whenenabled, you can set the two keyboard typematic control that follow(Typematic Rate and Typematic Rate Delay). If this item is disabled,the BIOS will use the default setting.Typematic Rate (Chars/Sec):When you press a key continuously, the keyboard will repeat thekeystroke according to the rate you have set. (Unit:characters/second° ^Typematic Rate Delay (Msec):When you press a key continuously, if you exceed the delay you haveset here, the keyboard will automatically repeat the keystrokeaccording a certain rate. (Unit: milliseconds) |
Related manuals for Abit AB-IT5H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine