Abit LG95C Installation Manual

Contents

Abit LG95C Installation Manual Manual pdf 10 page image

6 LG-95Z V2.0/LG-95C1.6 Installing Hardware※ DO NOT scratch the motherboard when installing hardware. Anaccidental scratch of a tiny surface-mount component may seriouslydamage the motherboard.※ In order to protect the contact pins, please pay attention to thesenotices:1. A maximum 20 cycles of CPU installation is recommended.2. Never touch the contact pins with fingers or any object.3. Always put on the cap when the CPU is not in use.1.6.1 CPU Socket 775※ The installation procedures vary with different types of CPUfan-and-heatsink assembly. The one shown here is served for demoonly. For detailed information on how to install the one you bought,refer to its installation guidelines.1. Place the board so thatthe lever-hook of thesocket is on your leftside. Use your left thumband forefinger to holdthe lever hook, pull itaway from the retentiontab. Rotate the lever tofully open position.2. Use your right-thumb toraise the load plate. Liftit up to fully openposition.3. Use your right thumband forefinger to graspthe CPU package. Besure to grasp on theedge of the substrate,and face the Pin-1indicator toward thebottom-left side. Aim atthe socket and place theCPU package verticaldown into the socket.4. Visually inspect if theCPU is seated well intothe socket. Thealignment key must belocated in the notch ofpackage.