Quick Start GuideBlue2™ 4th Generationwww.ablenetinc.com(800) 322-0956PN 98000035 (08/19 Rev. E)Switch 1(White)Switch 2(Orange)On/OffSwitchMode ButtonLearnSwitch Switch Jack 1Switch Jack 2Micro USBCharging JackUSBProgrammingJackKeyboardToggleButtonPairingButtonModeIndicatorLightsSwitchIndicatorLightsSetup For iPad or iPhone1. Go to Settings App > Bluetooth and make sure Bluetoothis turned on2. Turn Blue2 on3. On Blue2, press the Mode button to select a use mode4. Under devices, select BLUE2-XXXXXXXXX (X’s denoteBlue2’s serial number). If you see more than one Blue2listed, look on the back of Blue2 and match the serialnumber on Blue2 to the serial number on the iPad oriPhone.5. Configure iOS Switch Control or switch settings in theapp you are going to use6. Activate the white and orange switch tops on Blue2For use with macOS, Windows, and Chrome go towww.ablenetinc.com and visit the Blue2 product page.External SwitchesPlug wired switches into switch jack 1 or switch jack 2 onBlue2.Sleep ModeAfter 15-minuts of inactivity, Blue2 will go into sleep mode.Activate either switch to wake Blue2. Blue2 will re-connectto your device within approximately 3-seconds.Charging1. Select appropriate wall adapter for your region2. Connect Blue2 to wall charger3. While charging the switch indicator light S1 and S2 willblink on and off. When fully charged the switch indicatorlights will remain lit.Use ModesBlue2 sends keystrokes to the app or software when aswitch is activated. The keystrokes for each mode are listedon the back of Blue2.• Mode 1: Space, Enter• Mode 2: 1, 3• Mode 3: ~1, ~3• Mode 4: Left mouse click, right mouse click• Modes 5 and 6: Program 1 to 4 keystrokes of yourchoiceProgramming Modes 5 and 6You can program one to four keystrokes of your choice withmodes 5 and 6 on Blue2.1. Turn Blue2 on2. Plug a keyboard into Blue2’s USB programming jack3. Move Blue2’s learn switch to on by moving it left4. Select mode 5 or 6 on Blue25. Activate Switch 1 to start recording mode. The S1 lightwill blink while in recording mode.6. Activate up to four keystrokes that you would likerecorded to Switch 1 on the USB keyboard.7. Activate Switch 1 to stop recording mode8. Activate Switch 2 to start recording mode. The S2 lightwill blink while in recording mode.9. Activate up to four keystrokes that you would likerecorded to Switch 2 on the USB keyboard.10. Activate Switch 2 to stop recording mode11. Move Blue2’s learn switch to off by moving it to the right12. Disconnect the keyboard from Blue213. Select your new mode to useSupportIf you encounter issues, go to www.ablenetinc.com and visitthe Blue2 product page.