Quick Start GuideLITTLE Step-by-Step™communication devicewww.ablenetinc.comGetting Started1. Add one alkaline 9-volt battery to device (batterynot included). To open battery door, rotate D-ringcounterclockwise and lift up. To lock battery door, rotateD-rignt clockwise.2. Turn device on3. Select desired level4. Press and hold record button until recording indicatorlight turns on5. Press and hold colored switch top. Begin speaking intomicrophone after you hear beep.6. When done recording message, release colored switchtop7. Repeat steps 5 and 6 to record additional messages.8. Press the record button to turn the recording indicatorlight off9. Adjust volume as needed10. Your device is ready to useChange Colored Switch Tops1. Remove clear snap cap2. Rotate colored switch top counterclockwise to removeand rotate clockwise to tighten.3. Re-attach clear snap capPicture Symbol OverlaysA picture symbol can be placed under the clear snap cap togive additional context to what will happen when the coloredswitch top is activated. Symbol overlays should fit within a2-in (5-cm) circle area.Play Message With an AccessibilitySwitch1. Plug an AbleNet accessibility switch with 1/8-in (3.5-mm)switch plug into the accessibility switch input jack onthe device2. Activate the accessibility switch to play the message onthe deviceRepeating a Message1. Play message you want repeated2. Press record button one time after the desired messagehas ended3. The same message will repeat when the colored switchtop is activated4. To continue to the next message, press record buttonone timeActivate Switch Adapted Toys orAppliances1. While recording a message, press the record button onetime to assign the toy/appliance to that message2. Plug your toy or appliance into the 1/8-in (3.5-mm)toy/appliance output jack on the device. Some toysor appliances may require the included plug-to-plugadapter to be used to connect to the device.3. The toy or appliance will activate as long as the messageis playing.Note: Some electrical appliances will require a PowerLink tobe activated.Updated: April 22, 2020 2:23 PMLevelsswitchOFFRECORD SWITCH TOY/APPL.Requires onealkaline 9-voltbattery (batterynot included)#6-32 threaded insertsfor AbleNet UniversalMounting Plateattachment (mountingplate not included)Clear snap cap forsymbol overlaysColored switch topactivation surface (red,green, yellow, and blueswitch tops inncluded)MicrophoneRecord buttonOn/off andvolume controlRecording indicatorlight1/8-in (3.5-mm) accessibilityswitch input jack1/8-in (3.5-mm) toy/applianceoutput jackSound output speaker