AbleNet Mini Beamer Quick Start Manual
    |
Quick Start GuideMini Beamer™Transmitter & Receiverwww.ablenetinc.com1-800-322-0956PN 98000021 (07/13 Rev. A)Mini Beamer TransmitterNote: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more ofthe following measures:• Reorient or relocate the receiving antenna.• Increase the separation between equipment and receiver.• Consult AbleNet Technical Support or your local Distributor for help.Additional InformationVisit www.ablenetinc.com for mounting options. Mini Beamer Transmittersand Receivers have an effective range of up to 30 feet.AbleNet manufactured products include a two-year limited warranty. Thiswarranty is against defects in materials and manufacturing for two-yearsfrom the date of purchase. Warranty in full text, along with return/repairinformation is available at www.ablenetinc.com.For more information on AbleNet products and services, contact:AbleNet, Inc. 2625 Patton Road, Roseville, MN 551131-800-322-0956www.ablenetinc.comMini Beamer ReceiverMini Beamer Transmitter OperationActivate power button for 5-seconds to turn wireless transmitter on or off.Mini Beamer Transmitter must be paired to an AbleNet wireless receiverto operate. One transmitter can be paired with multiple wireless receiversto activate multiple items at the same time.To activate, place a finger or other portion of body within 10mm of theactivation surface or touch the activation surface. Indicator light willblink and an auditory beep will play upon activation. The indicator lightwill blink and auditory beep will play a second time upon release of theactivation.To charge, select the appropriate wall adapter for your region. Insertmicro USB portion of wall charger into battery charging port on MiniBeamer Transmitter and plug wall adapter into wall outlet. While chargingthe indicator light will blink on and off. When fully charged the indicatorlight will remain lit.Mini Beamer Receiver OperationActivate power button for 5-seconds to turn wireless receiver on or off.Mini Beamer Receiver must be paired to an AbleNet wireless transmitterand the plug-to-plug adapter must be attached to the device you aretrying to operate with a switch. One receiver can be paired with up toeight wireless transmitters to allow multiple people to participate at thesame time.To enter pairing mode, hold the mode button down 5-seconds. Activateeach wireless transmitter to pair it with the wireless receiver. Activate themode button to exit pairing mode.Select desired mode of operation by activating the mode button.• Direct: Device is activated when wireless transmitter is activated.• Seconds: Device is activated for 1 to 60 seconds after a wirelesstransmitter is activated. Activate the power button to change theseconds.• Minutes: Device is activated for 1 to 99 minutes after a wirelesstransmitter is activated. Activate the power button to change theminutes.• Latch: Device is activated and remains on when wireless transmitteris activated. Activate the wireless transmitter a second time to turnoff.To charge, select the appropriate wall adapter for your region. Insertmicro USB portion of wall charger into battery charging port on MiniBeamer Receiver and plug wall adapter into wall outlet. While charging aplug symbol will flash next to the battery indicator on the wireless receiver.When fully charged the plug symbol will remain lit.IndicatorLightSwitch InputJackDeviceResetBatteryChargingPortActivationSurfacePowerButtonToy/ApplianceJackDeviceResetBatteryChargingPortPowerButtonModeButton |
Related manuals for AbleNet Mini Beamer
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine