Abloy DA400 User Manual
Also see for DA400: Manual
                                      | |
INSTALLATION4Extension pieceNote!6Inspect the swing door operator against transport damage.Test the free swinging of the door, which should open and close smoothly.The automatic swing door operator is to be installed on the transom, with themains switch located towards the hinge.For , the door operator is mounted on the stop side of the doorinstalling the standard arm 7281 or 7282.For , the door operator is mounted on the hinge side of the doorinstalling the sliding arm 7611.Use extension pieces for non standard applications. Maximum extensionshaft length 60 mm. Extension shafts: 10 mm, 20 mm, 60 mm.push functionpull functionMount a door stop to the door open position so that wind will not drive thedoor against the wall, resulting in damage.The door stop can be either floor or wall mounted.DOOR SIZE/DOOR WEIGHTSStandard arm7281, 7282 forpush functionSliding arm7611 for pullfunctionDoor width max. 1 m ... max. 125 kgDoor width max. 1.15 m ... max. 100 kgDoor width max. 1.3 m ... max. 90 kgDoor width max. 1 m ... max. 80 kgDoor width max. 1.15 m ... max. 70 kgDoor width max. 1.3 m ... max. 60 kgSliding arm 7611Standard arm 7281, 7282When specifying, please take account of door surroundingsand exposure to weather conditions |
Related manuals for Abloy DA400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine