BHC110 -- Bluetooth HeadsetQuick Installation GuideButtonsStarting to UseHow to ChargePlug the charger into the headset. Plug the otherend of the charger into an electrical outlet. During thecharging, the red LED turns on and remains on untilcharging is complete. When charging is complete (redLED is off), remove the charger form the electricaloutlet and detach the charger from the speaker.Pairing Your Headset and PhoneBefore you can use your Bluetooth headset you’reyour phone it has to be added once to the phone.Follow the instruction form the phone user guide onhow to turn on the Bluetooth in your phone. With theheadset and phone in close proximity:1. Make sure the headset is in power off. Press thepower button for 6 seconds until the blue and redLED flashes.2. Initiate the pairing sequence using hands-freemode if available. The unit may also be paired inheadset mode if hands-free mode is not available.3. Perform a device discovery from the phone.For details on device discovery for your phone,refer to the user guide for the phone.4. Select the Mono Headset from the discovereddevices list, and then confirm following the onscreen prompts.5. When prompted by the phone, enter the passkey0000, and then confirm to pair the headset withthe phone.Controlling Headset VolumeIncrease: Press the volume button in the + positionrepeatedly until you reach the desired volume level.Decrease: Press the volume button in the - positionrepeatedly until you reach the desired volume level.Placing and Receiving CallsYour headset supports both Hands-free andHeadset Profiles. Accessing call functions depends onwhich profile your phone supports.Action FunctionVery Long Press Power PairingPower OnPower OffLong Press PowerReject a CallReceive a CallEnd a CallShort Press PowerVoice DialRedialLong Press Redial Call TransferMute OnShort Press Redial Mute OffUsing Your Headset IndicatorsLED HeadsetOFF Power OffRed/Blue rapid flashes Pairing modeBlue flashes Power OnRed On ChargingRed flashes Power LowRed flashed 5 times Powering Off