1—Check the package contentsOFF2—Charge the battery3—Turn on the power4—Pair with headset or audio dongleUnpack the Bluetooth Headset and checkthat the following items are included:The battery lasts eight hours and is re-charged using the power adapter or theUSB cable. To recharge:Plug the USB cable into the DC jack onthe Bluetooth Headset and connect theother end to your PC.orPlug the power adapter into the DC jackon the Bluetooth Headset and connect theother end to an electrical outlet.The Bluetooth Headset can be used witha Bluetooth A/V Transmitter or BluetoothAudio Dongle. On fi rst use, the devices mustbe paired.To pair the devices.1. Connect your transmitter to an audiodevice.2. Turn on the power on your BluetoothHeadset.3. Turn on the power on the transmitter.Recharging takes 90 minutes.OFFOFFBluetooth A/V Transmitteror Bluetooth Audio Dongleor Bluetooth Audio DongleorUSB Cable Audio CableQuick Guide Power AdapterBluetooth HeadsetTo turn on the power, press and hold thepower button until the power LED lights blue.To turn off the power, press and hold thepower button until the power LED turns off.Blue LED power is onBlue fl ashing LED connected to deviceRed LED battery is charging, turns off whenchargedRed fl ashing LED battery is low, rechargebefore LED turns offCharging LEDBattery low LEDPower buttonMuteon/off DC jackVolume +/-Power/link LEDForward/Forward/backward