Abocom WR5502 User Manual

Abocom WR5502 User Manual Manual pdf 38 page image

36Port ForwardingEntries in this table allow you to automatically redirect common network services to a specificmachine behind the NAT firewall. These settings are only necessary if you wish to host somesort of server like a web server or mail server on the private local network behind your Gate-way's NAT firewall.Enable Port Forward-ing Check to enable Port Forwarding function.IP Address Enter the IP address in the field.Protocol Select the protocol (TCP, UDP or Both) used to the remotesystem or service.Port Range For TCP and UDP Services, enter the beginning of the range ofport numbers used by the service. If the service uses a singleport number, enter it in both the start and finish fields.Comment You may key in a description MAC address.Apply Changes After completing the settings on this page, click ApplyChanges button to save the settings.Reset Click Reset button to restore to default values.Current Port Forward-ing Table Shows the current Port Forwarding information.Delete Selected Click Delete Selected button to delete items which are selected.Delete All Click Delete All button to delete all the items.Reset Click Reset button to rest.