Abriblue OPEN Classic Installation Instructions Manual
                            | |
Contents
| 
3/20 - Installation instructions for the OPEN Classic out of pool automatic safety coverCONTENTS1. Preparing the pool1.1 Electric connections and cable passages 41.2 Building work 51.3 Squaring checks 52. Delivery and Reception2.1 Delivery 62.2 Reception 62.3 Necessary tools 62.4 Items in the container 63. Assembling the roller3.1 Offset plate option: assembly on the post 73.2 Fitting the shaft onto the posts 73.3 Placing the roller on the pool 83.4 Preparing the fixtures 83.5 Offset plate option: fixture to the ground 83.6 Placing the threaded rods 93.7 Sealing the threaded rods 93.8 Cutting the pool copings 93.9 Adjusting and tightening the posts 103.10 Final overall dimensions of the pool cover 104. Electric connections4.1 Box 114.2 Motor and key switch 114.3 Roller rotation test 114.4 Uncoupling 115. Assembling the slats5.1 Placing the slats on the water 125.2 Assembling the slats 125.3 Adjusting the number of slats 125.4 Controlling the fit 125.5 Installing the stair slats 135.6 Slat orientation ski 135.7 Fixing the apron to the pool 145.8 Fixing the anti-lifting buckles 145.9 Fixing with the Coverlock system. 156. Run stop adjustments6.1 End of unrolling 176.2 Fixing the apron to the shaft 176.3 Adjustment of the end of rolling stop 177. Test instructions in the event of a malfunction7.1 Checking the box 187.2 Checking the power supply cable between the electric boxand the roller motor 187.3 Checking the key switch 187.4 Direct check of the motor 198. Checks9. Reception of the cover by the end user476111217202018 |
Related manuals for Abriblue OPEN Classic
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine