606.5 HDD installationFitting the hard disk1. Step: Switch off the digital recorder and open the hard-disk slot.2. Step: Turn the handle carefully to the left and pull the HDD frame carefully out of theslot. (Keys and fitting screws are contained in the HDD frame.)3. Step: Push the plastic lock of the HDD frame cover down and push the upper coverof the HDD frame back.4. Step: Fix the hard-disk with two screws on the left and two screws on the right of theHDD frame and then close the frame with the upper cover.5. Step: Insert the HDD frame back into the slot, push it until engages, and turnthe handle to the right. Now lock the hard disk with the key.6.6 Mouse installationConnect mouse to the PS/2 port at rear side inorder to control the DVR by mouse.It is also possible to use a USB mouse with aUSB->PS/2 converter.6.7 Power pluggingInsert the adapter to the rear power socket of DVR.Insert the power cable to the other side of adapter.Plug in the power cable andpower on the DVR.