Abus PPIC32020 User Manual
Also see for PPIC32020: User guideQuick guideQuick guide
                            | |
Contents
| 
27English11.4. Motion detection settingsDetection mode: Off / Software / PIRYou can change the detection mode here. If it is switched off,no recording or notification will take place if motion is detected.The choice between Software and PIR detection modes is onlyavailable if your camera has an integrated PIR sensor.Information about the use of software detectionThe camera will detect differences in light between the individual pixels if softwaredetection is in use. Please note that accidental deployment may occur if the camera isorientated towards a scene with fluctuations in light as standard(e.g. sunlight through a window).Information about the use of PIR detectionThe camera detects differences in temperature using the integrated passive infraredsensor (PIR). Please note that accidental deployment may occur if the camera isorientated towards a scene with fluctuations in temperature as standard(e.g. windows, radiators, larger metal objects).Sensitivity: You can change the sensitivity of the software detection for dayand night here. A high value will lead to detection in the eventof minor changes, and a low value will trigger only in the eventof more major changes to the camera image.Motion screen: If you have enabled software detection, you can excludeindividual image sectors from the detection. Click the desiredimage sectors to do this. If the sector is black, no motion will bedetected here.11.5. Notification settingsNotification: You can enable or disable push notifications here.Language notification: You can change the language of the push notifications here.Email: You can enter the email sender and receiver data here to setup email notification.You can also enable email notification in the camera settingsfor the respective camera (see item 10.1. ).11.6. Storage settingsSD card: Format the SD card here.Circular buffer: You can enable or disable the circular buffer here.NoteIf the circular buffer is active, the camera transfers the earliest files when the SD card isfull. If the circular buffer is deactivated, the camera stops recording once the SD card isfull. |
Related manuals for Abus PPIC32020
manualsdatabase
Your AI-powered manual search engine