15German6.5. Device pageOn the device page, all essential status displays of the device aredisplayed.Actuators of the devices (e.g. radio socket) can be controlled directly byclicking on the icon.You can also perform the following actions:Name Change device nameForce Delete Remove defective or inactive devicesConfiguration Open configuration pageWake-up interval Change wake-up intervalRoom assigned Change assigned roomActivate/deactivate push notification for therespective status6.5.1. Configuration pageSome devices allow the configuration of certain parameters. These can beset via the configuration page.Refer to the manual of the respective device to find out which parametersettings are possible.Recover value:Enter the parameter, select the corresponding byte size (1 / 2 / 4 bytes)and click on "GET".Set value:Enter the parameter and the value, select the byte size (1 / 2 / 4 bytes)and click on "SET".6.5.2. Wake-up intervalThe wake-up interval determines how often a battery device wakes up andreports to the gateway.With the multisensor, for example, you can also set how often, forexample, the temperature value is to be transmitted.A change in the wake-up interval will significantly affect thebattery life of the device. The stated battery life of ABUSdevices refers only to the standard wake-up interval! You canfind this information in the BDA of the device.