Abus SHRM10000 Original Operating Instructions

Also see for SHRM10000: User manual

Contents

Abus SHRM10000 Original Operating Instructions Manual pdf 11 page image

11English4.6. Alarm state: SmokeIf smoke is detected, a loud, pulsing alarm tone sounds and the red LED flashesat the same time at short intervals. In this case, proceed as described in the“Behaviour in case of alarm” chapter.4.7. Alarm muting function (hush mode)If the detector is in the alarm state, the acoustic alarm canbe deactivated for 10 minutes by pressing the Test button.If the muting function is active, the red LED flashes every10 seconds.If smoke is still detected in the smoke measurementchamber after the 10-minute muting period, the acousticalarm will sound again.5. Overview of functions5.1. Inclusion / Add DeviceASlide the base unit from the mounting plateand remove the safety strip from the batterycompartmentBClick the + (Add) button in your Z-Wave Appand follow the further instructions