Abus TVCC20000 User Manual

Also see for TVCC20000: User manual

Contents

Abus TVCC20000 User Manual Manual pdf 20 page image

206. Mounting6.1 Power supplyBefore you start with the installation please make sure that the main voltage and the nominalvoltage of the camera comply together.(1) TVCC20000, TVCC20010, TVCC20020,TVCC20030, TVCC20040(2) TVCC20510, TVCC20520, TVCC20530,TVCC20540(1) TVCC20000, TVCC20010, TVCC20020, TVCC20030 and TVCC20040 are run by a12VDC power supply. In order to connect a 12VDC power supply (DC Connector 5.5mm x2.1mm) to the camera you have to first install the included connector cable. Therefore youneed to press the pins and insert the cable ends into the terminals.(2) TVCC20510, TVCC20520, TVCC20530 and TVCC20540 are run by a 110~240VAC powersupply (preinstalled cable).6.2 Lens mountingThe camera is designated for lenses with CS-Mount. A lens with C-Mount can bemounted with the enclosed lens adapter ring.Before a lens with C-Mount can be mounted, please make sure that the lens adapterring is mounted on the camera. Otherwise you may damage the image sensor.For lenses with DC-drive the connector for the lens cable is on the right side of thecamera. The lens type is identified automatically by the camera (except TVCC20000).A lens with DC-drive is recommended for an optimal image quality.6.3 Mounting of the video cableTo connect the video signal of the camera with a monitor or recorder, use a coaxial cable of thetype RG59 with BNC-Connector (male) at the “VIDEO-OUT” connector.The cable length up to the next device should not rise 100 meters.