112ActionFile size: Define the file size for a video file here (1–50 MB).Event server: Choose between an SD card and a network drive as the target server. It is necessary thatan SD card or network drive be configured in the camera.ScheduleAlways: The event action is always executed without a time-based restriction.Schedule: Here a schedule that has already been configured can be selected for the event action.Schedules are configured under the “Event / Schedule” item.6.7 Switching input and switching outputThe settings for the switching output and switching input are defined here.Port: Switching input or outputNormal: Setting for the normal state of the port.NO (normally open)NC (normally closed)Current status: Open Circuit = OpenClosed Circuit = Closed6.8 Motion detectionName: Name of the motion windowNight suppress: The function night suppress will provide a 2nd value for sensitivity in night mode.The higher the level for night suppress function, the lower is the sensitivity innight mode.Show all areas: Check this box to show all configured motion areas in the preview video image.Threshold value: Threshold value for triggering of a motion eventSensitivity: Sensitivity setting of the motion areaFor setting of the motion detection, an indicator in the preview video shows the current values of the thresholdvalue and the current triggering value. This helps with the configuration of the threshold value and sensitivity.Add:Delete: Remove a configured motion area. Before doing this, you need to select an entryfrom the list of motion areas.