Abus TVIP91 series User Manual

Also see for TVIP91 Series: User manual

Abus TVIP91 series User Manual Manual pdf 18 page image

726. InstallationInstructions for how to mount the camera are described in the quickstart guide for the relevant IPcamera TVIP9XXXX.When mounting the dome cameras TVIP91700 and TVIP92700 please make surethat the desiccant bag supplied is placed inside the camera before placing on thedome. The bag must be placed close to the base plate. The bag must not be in thefield of view of the lens. The bag must not be placed directly behind the lens or thecamera board.6.2 Laying the cablesYou must pay attention to the following instructions when laying the cables:TVIP91100/TVIP92100A break-out panel for feeding the cable is located on the base plate for laying the cables at theside. Use pliers to remove the break-out panel. Use a file to smooth out the edges of the break-out panel.TVIP91300/TVIP92300A break-out panel for feeding the cable is provided for laying the cables at the side. Use a flat,narrow screwdriver to remove the break-out panel from the plastic.These cameras are equipped ex works with a short connecting cable for networking(RJ45), power supply (barrel connector) and analogue video output. Making theconnection is possible from inside the camera. In the most simple case, a networkcable with Power over Ethernet power supply is all that's needed to operate thecamera.If the functions switching input, switching output or audio input/output (TVIP92300only) are needed, you must install an extended connecting cable (for TVIP91300:TVAC40700; for TVIP92300: TVAC40720).TVIP92500When laying the cable, ensure that none of the plug connections is subject to mechanical tension.Furthermore, cables must be fixed in such a way as to prevent the plug from being bent orsnapped off.TVIP91600/TVIP92600 / TVIP92610A break-out panel for feeding the cable is located on the base plate for laying the cables at theside. Use pliers to remove the break-out panel. Use a file to smooth out the edges of the break-out panel.