Panic Recording49Panic RecordingRecordingPress the REC button or navigate to ManualManagement in the main menu to start manualpicture/video recording. The settings are identical forsnapshots and so will only be described once.If a recording is started manually, it also has to bestopped manually. All manual recordings will bedeactivated when the recorder is rebooted.Click on the "Record" submenu.Select the settings for all cameras. Click on "Off" or "On"to change the settings."On (green)" "Off (red)"Manually stop recording"Off (red)" "On (yellow)"Manual continuous recording"On (yellow)" "Off (red)"Manual continuous recording is stopped and if aschedule has been configured for the camera, it will beactivated automatically (green).AlarmHere you can select the alarm output which should beswitched in the event of manual management.You can switch several alarm outputs in the event of amanual response.Select Trigger to activate the selected alarm output.Click on Trigger All to activate all of the alarm outputs.Click on Clear All to remove the settings.Parameter DescriptionNormal Click on the icon to activate continuousrecording for all channels for the wholeday.Click on "Yes" to confirm your selection.MotiondetectionClick on the icon to activate motiondetection for all channels for the wholeday.Click on "Yes" to confirm your selection.