Abus TVVR41200 User Manual

Also see for TVVR41200: Quick guide

Contents

Abus TVVR41200 User Manual Manual pdf 78 page image

Live view78SettingsNoteThe live view can be set as follows.Open the main menu, then click on “Configuration”. Thenclick on “Liveview”:The following settings are available in the TAB “General”:Video Output In-terfaceVGA/HDMI, Main CVBSSelect the connection where the set-tings are changedLive View Mode Different camera layoutsDwell Time Switching time between the individu-al cameras and the sequence dis-playAudio Activate audioDisplay statusbarActivate/deactivate the status barEvent Output Allocate monitor for the output ofeventsFull ScreenMonitoring Dura-tionin seconds, where the event on theallocated monitor will be displayed.Post Event Dis-play Timein seconds, the duration of the Pop-up window when an event occurs.NoteVGA monitor connected:A connected VGA monitor automatically becomesthe main monitor where the audio output is alsoassigned.No HDMI monitor connectedIf during the boot process of the DVR the HDMI cable is notconnected, the main video signal is displayed at VGA output .Connect the HDMI cable and reboot the DVR in order to dis-play the main video signal at the HDMI output.Setting the camera outputYou can display a maximum of 16 cameras simultane-ously in the live view.1. Click on the TAB “View”.2. Select the display mode(depends on the model) 1 x 1 2 x 2 1 + 5 1 + 7 3 x 3 4 x 43. The camera signal is assigned to the correspondingimage section using the navigation keys. “X” means that this camera is not displayed.4. Click on Apply to accept the settings.