Device menu41System Settings: ExceptionNoteEnter the trigger under “Exception Type”, for ex-ample:• HDD Full• DisconnectedAfter doing this, specify the device behaviour asdetailed on page 39.System Settings: UserWarningNote down the admin password.The following password is preset“1 2 3 4 5”You can add new users, delete existing users andchange the settings in the “User Settings” menu.1. To add a new user, select Add.Parameter SettingUser Name Unique identificationPassword Access code for the device (device man-agement)Note: Change all passwords on a regularbasis, using a combination of letters andnumbers. Note down all passwords in asafe place.Confirm Enter the access code again hereLevel IMPORTANT:More access rights can be set on theManager level than on the User level.User's MAC MAC address of the network adapter onthe PC of the corresponding userNote:This limits access to the PC whose MACaddress is entered here!2. Enter the name and password and confirm thepassword in the field below.3. Select the level and enter the MAC address.WarningPay attention to the instructions below on assign-ing access rights.