3: Management & ConfigurationTimezone and Daylight savingFor a list of time zones and daylight saving time rules, please refer to: http://www.worldtimezone.com/.UTC offsetOffset from Coordinated Universal Time. North America would have negative values while Eastern Europe would havepositive values.Daylight saving enableFor regions of the world implementing Daylight saving time, this can be enabled.Beware that syslog and other services that timestamp events using the current date and time will be affected duringtransitions of DST periods. There will possibly be an hour gap or duplicate time stamps because the clock was set back.Daylight saving offsetTime correction to apply to GMT offset during the Daylight saving period. Most of the time it will be one hour.DST start and DST endPeriod where daylight saving time is in effect.The events are described as:"the change will take place on the n'th (week) of (month) on a (day) at (hour) (min)"To describe the last day of the month, use week=5Examples:Montreal, Quebec, Canada time:UTC offset=-5, DST enable=check, DST offset=1DST start: Month=March, Week=2, Day=Sunday, Hour=2, Min=0DST end: Month=November, Week=1, Day=Sunday, Hour=2, Min=0Wellington, New ZealandUTC offset=12, DST enable=check, DST offset=1,DST start: Month=September, Week=5, Day=Sunday, Hour=2, Min=0DST end: Month=April, Week=1, Day=Sunday, Hour=3, Min=0
