Accelerated Concepts 6355-S User Manual
                                | |
20© 2017 Accelerated Concepts, Inc.accelerated.comSR-Series User ManualInterface Configurationchanging the Lan subnetthe defAult subnet -- 192.168.0.x -- cAn be Adjusted to Any rAnge of privAte ips by completingthe following steps:1. expAnd the configurAtion pAge to NETwOrk > iNTErFacES.2. select the laN interfAce thAt needs to be Adjusted And expAnd itsipv4 entry.3. the addrESS field contAins the rAnge of ips AvAilAble for Assignment.NOTE: the subnet mAsk must Also be specified.creating new interfacesAdditionAl interfAces mAy be configured to further differentiAte portfunctionAlity:1. expAnd the configurAtion pAge to NETwOrk > iNTErFacES.2. nAme the new iNTErFacE using the text field At the bottom of the list,clicking the add button to continue.3. ensure the AppropriAte settings Are entered into the new collApsiblesection generAted for the interfAce:• the ENablE checkbox must remAin selected.• interface tyPe will stAy EThErNET.• the defAult ZONE, "Any," suffices unless security policies necessitAte A different selection.• dEVicE estAblishes which port(s) Are Assigned to the new interfAce.• expAnd the iPV4 cAtegory to specify the interfAce type And the desired Address rAnge.• AdditionAl settings for dNS And dhcP configurAtion cAn be Adjusted As necessAry .• refer to the FailOVEr section for informAtion on cONNEcTiViTY MONiTOriNg.NOTEthe defAult subnetIs set In the IPv4address fIeld ofthe lAn InterfAce.NOTEthIs Assumes AstAtIc ( prIvAte) IpIs desIred for theInterfAce.NOTEchAnges mAde tothe Ipv4 A ddressmust Also beupdAted In thedhcp serverentry to preservefunctIonAlIty. |
Related manuals for Accelerated Concepts 6350-SR
manualsdatabase
Your AI-powered manual search engine