Accell J135C-003B Instructions For Use Manual
 |
MHL to HDMI AdapterInstructions for use1. With the power to the TV off, connect an HDMI cable from the HDMI port onthe MHL adapter to your HDMI TV or other HDMI device.Note: Supplying power to the connected MHL source device will allow the sourcedevice to remain charged while being used. Use the charger supplied orapproved by the manufacturer of your mobile device.2. If power to the MHL device is desired, connect the USB Micro-B cable fromyour mobile devices supplied travel charger to the CHARGE port on the side ofthe adapter. See note below.3. Plug your mobile device’s supplied travel charger into a power source.4. With the MHL enabled device turned off, connect the MHL adapter’s USBMicro-B connector to the MHL enabled source device.5. Turn on the TV and MHL source device.6. Configure the TV to the HDMI input being used. Refer to the TV’s instructionsfor more information.7. If needed, configure your MHL enabled device to output audio and/or videothrough the MHL connector. Refer to the source device’s instruction manual formore information on enabling the MHL output.Note: The use of a power adapter is dependent upon the source device's abilityto supply power from its USB Micro-B port. |
Related manuals for Accell J135C-003B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine