Accent 800 Hardware Manual
Also see for 800: Hardware manualGetting startedUser guide
                                    | |
Contents
| 
Modifying a Device1. Use the Up/Down arrows to select the appropriate device. When the appropriate device isfound, tap the button for the desired function and follow the instructions on the display.2. Select Modify Selected Device.3. Select the function to be changed and follow the instructions on the display.4. When instructed, point the appliance’s remote control at the top of the Accent and pressthe appropriate function button on the remote (e.g., power). When teaching the device a new signal or re-learning a signal, make sure the remote ispointed directly at the IR Learning Receiver on the left side of the headphone jack.5. The Accent will beep when it receives the signal.6. Select Test Signal to confirm that the signal functions properly. The Re-Learn All Signals option allows each signal for an appliance to be re-learnedwithout re-entering the menu each time.Sending IR Signals to an Appliance1. Make sure the IR area on the Accent is facing toward the appliance that will receive thesignal.2. Select the device remote from the vocabulary screen.3. Select the desired function.Accent 800 Hardware Manual Page 20 |
Related manuals for Accent 800
manualsdatabase
Your AI-powered manual search engine