Access Interfacing Solutions BGR700 Product Manual
              | |
Page 7 of 14 Copyright © Access-IS 20173. Installation3.1 Unpack the BGR700Unpack the BGR700 and ensure that you have the following items:• Advisory notice card.• BGR700 device.• Serial and power cable.or• USB and power cable.• Universal 12 V AC power supply.Report any missing items or damage immediately to your Sales Representative.3.2 Connect the BGR700Connectors for host, printer, Ethernet and USB are located on the back of the BGR700.Note: The over-moulding for the host cable is colour-coded green to match label under theconnector. The over-moulding for the printer cable is colour-coded blue to match label under theconnector. Ethernet and USB ports are reserved for future use.To connect the BGR700:1. Switch off the computer.2. Push the RJ50 connector into the host socket on the back of the BGR700 until you hear a click.3. If using a serial cable, connect the serial connector to a COM port on the computer andfinger-tighten the two thumbscrews to secure the connector to the port.If using a USB cable, connect the USB connector to a USB port on the computer.Figure 2: Serial connection cable Figure 3: USB connection cable |
Related manuals for Access Interfacing Solutions BGR700
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine