CERTIFICATION: cULus DAMP NO. 31000LEDSWACD; 31000LEDSWAD1INSTALLATION INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSMESURES DE SECURITE A RESPECTUREBefore assembling your ACCESS LIGHTING fixture, please make sure that youcarefully read through this instruction sheet. Save this instruction sheet andrefer to it when additions to or changes in the fixture configuration are madeLisez attentivement ce manuel d’instructions. Enregistrer cette feuilled'instructions et de s'y référer lorsque les ajouts ou changements dans laconfiguration de montage sont faites.CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCHCIRCUIT CONDUCTOR.CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LESCONDUCTEURS DE LA DERIVATION SONT ADEQUATSTHIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLEINSTALLATION CODE BY A PERSON FAMILIAR WITH THECONTSTRUCTION AND OPERATION OF THE PRODUCT AND THEHAZARDS INVOLVED.CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATIONPERTINENT, PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ETSON FONCTIONNEMENT AINSI QUE LES RISQUES INHERENTSNOTE: The important safeguards and instructions that appear in this manualare not meant to cover all possible conditions and situations that may occur. Itmust be understood that common sense, caution and care, are factors thatcan’t be built into any product. These factors must be supplied by the person(s)caring for and operating the fixture.Read all instructionsDo not install this fixture in hazardous locations.N'installez pas cet appareil dans des emplacements dangereux. Donot install any fixture assembly closer than 6 inches from any curtain orsimilar combustible material.Laisser une distance d’au moins 6 pouces entre ce luminaire et la toute surfacecombustible."WARNING Risk of Fire and Electric Shock."“CAUTION: Risque d’ Incendie et de Choc Electriques.”COLLECTION APPLICATIONATOM Ceiling FixtureMODEL NO.31000LEDSWACD31000LEDSWADWHAT WE PROVIDE WHAT YOU NEED• Mounting Hardware• Fixture Assembly• Crossbar plate• 1 x Glass shade• LED Module• Wireless Dimmer (Seeadditional manual for use andtroubleshooting)• Screwdriver• Wire Cutters• Wiring Supplies as Specifiedby Electrical CodeGENERAL INFORMATIONSTEP BY STEP INSTRUCTIONSAll electrical connections must be in accordance with all ordinances,Local and the U.S. National Electrical Codes (NEC). These fixtures areintended for mounting to a standard 4” metal octagon outlet box.The box must be directly supported by the building structure and U.L.recognized.Before starting your installation disconnect the Power by turning off theCircuit Breaker or by removing the fuse at the fuse box. Just turning the lightoff at the light switch is not sufficient to prevent electrical shock.Philips Hue connects to other smart devicesand services (e.g. voice control), which isenabled by the Philips Hue bridge.(Sold Separately)During installation of this fixture please do not touch the LEDs orRF module. Touching may result in unwanted operation of theLighting Fixture