Acclima SC24 User Manual
                               | |
Contents
| 
Controller Programming (advanced)Page 18the common wire due to missing insulation on the wires. This can cause communicationserrors between the controller and sensors and will eventually cause the wires to corrodeaway and system failure. This current should read 0 (-----).Press the Back button to return to the main Test screen.Walk-Around TestTo test the watering operation of all of the zones in your system use the Next and Prevbuttons to highlight the Walk Around Test field then press +.The Walk Around Test screen will appear. You can set the amount of time that eachzone will run in the Runtime for Each Zone field. You can access this field using theNext and Prev buttons and then set the run time with the + and – buttons. The startingzone appears in the Testing Zone field which defaults to zone 1. If you want to start at ahigher zone use the Next and Prev buttons to access the Testing Zone field and set thestarting zone with the + and – buttons.After you have set up the timing and starting zone use the Next and Prev buttons toreturn to the Start Test field and press +. Only zones with a valid runtime will operate.Unconfigured zones or disabled zones will be skipped.As the zones sequentially turn on you can 'walk around' with the pattern and inspect forbroken sprinkler heads, clogged heads, miss-operating valves, incomplete spraypatterns, and etc.4. Press the Back soft key to return to the Test screen. Pressing Back or rotating theknob will cancel any test that is in progress.Event PauseNOTE: This option provides advanced control of the irrigation, and is not required for thecontroller to operate.Event Pause enables the system to pause operations for up to 6 scheduled events. Thisis especially useful for scheduled social and sports events where irrigation must besuspended without turning off the system or adjusting the programs (risking forgetting torestore it).1. Select events from Event #1 through Event #6 by using the Next and Prevbuttons, then press + Adjust Value.2. Use the Next and Prev buttons to move between fields and the + or - AdjustValue buttons to change the Start Date, the date of the event, the Start Time, the time ofday the event begins, and the Duration, how long the even will last. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine