1IntroductionAccton’s Cheetah Wireless-3501C USB Adapter (WN3501C) is an 11 Mbps wirelessnetwork adapter that seamlessly integrates with existing Ethernet networks to supportapplications such as mobile users or temporary conferences. The adapter is fullycompliant with 2.4 GHz DSSS CSMA/CA wireless networking as defined in IEEE802.11b.This solution offers fast, reliable wireless connectivity with considerable cost savings overwired LANs (which include long-term maintenance overhead for cabling). Just plugwireless adapters into your desktop PCs and start networking.Using this adapter in conjunction with an Accton Cheetah Wireless Access Point orWireless Access Point/Bridge, you can create an instant network that integratesseamlessly with 10 Mbps Ethernet LANs. Moreover, moving or expanding your network isas easy as moving or installing additional Wireless AP/Bridges – no wires!System RequirementsBefore you install the Cheetah Wireless-3501C USB Adapter, verify that your systemmeets the following requirements:• An available USB port• Windows 98/Me/2000/XP (have the Windows installation CD-ROM ready for use duringdriver installation)• A minimum of 1 MB of free disk space for installing the driver and utility program• Another IEEE 802.11b compliant device installed in your network, such as a WirelessAccess Point, or another PC with a wireless adapterPackage ChecklistThe Cheetah Wireless-3501C USB Adapter package includes:• 1 Cheetah Wireless-3501C USB Adapter with internal antenna (WN3501C)• 1 CD ROM containing drivers, utility, and documentation• 1 USB cable• 1 Fastening clip• 3 Pieces of velcro• 2 Magnets• This Quick Installation Guide• 1 registration card (please complete and return)Please complete the warranty registration card and return to Accton or register online at:register.acctontech.com. To order the optional boot ROM, contact your local Acctondealer or reseller.