328Usage Guide: This command indicates whether QoS is enabled or not.Example:Switch #show mls-qosQos is enabledDisplayed information ExplanationQos is enabled QoS is enabled.13.1.4.1.2 show mls qos aggregate-policerCommand: show mls qos aggregate-policer [<aggregate-policer-name>]Function: Display policy set configuration information for QoS.Parameter: <aggregate-policer-name> is the policy set name.Default: N/A.Command mode: Admin ModeExample:Switch #show mls qos aggregate-policer policer1aggregate-policer policer1 80000 80 exceed-action dropNot used by any policy mapDisplayed information Explanationaggregate-policer policer1 80000 80exceed-action dropConfiguration for this policy set.Not used by any policy map Time of this policy set beingreferred to .13.1.4.1.3 show mls qos interfaceCommand: show mls qos interface [<interface-id>] [buffers | policers | queueing |statistics]Function: Display QoS configuration information on a port.Parameter: <interface-id> is the port ID; buffers is the queue buffer setting on the port;policers is the policy setting on the port; queuing is the queue setting for theport; statistics is the number of packets allowed to pass for in-profile andout-of-profile traffic according to the policy bound to the port.Default: N/A.Command mode: Admin ModeUsage Guide: Statistics are available only when ingress policy is configured.
