Accton Technology SuperSmart EtherHub-16se Installation Manual

Accton Technology SuperSmart EtherHub-16se Installation Manual Manual pdf 31 page image

SuperSmart User’s GuideSetup and Configuration 4-3Using the Configure ButtonThere are 5 configuration functions accessed in sequence usingthe Configure button, including:• Segment Setting• Demo Function• Diagnostic Function• Reset Function.A "long press" on the button allows you to switch from onefunction to the next. While a "short press" switches betweenselections within each function. LED indicators light up toindicate which configuration function the system is in.Before using the Configure button, remember that:• A "long press" means pressing the Configure button for morethan 2 seconds and then releasing the button. While a "shortpress" means pressing the Configure button and immediatelyreleasing it.• A "long press" has 2 functions. (1) It works like an [Enter]key  implementing the last selection displayed by the LEDindicators for the current function. (2) It brings the system tothe next configuration function.• A "short press" is used to switch between the selectionsavailable within each function. For example, in SegmentSetting, there are 4 selections available. By using a "shortpress" on the Configure button, you can move from oneselection (e.g., Attach hub to Segment 1) to the next (e.g.,Attach hub to Segment 2). Note, however, that a selection willonly take effect after a "long press" on the Configure button.• If the button is not pressed within 10 seconds, the systemreturns to normal operation effecting all changes made priorto selecting the current function.