20The Accu‑Chek FastClix Lancing Device2Inserting a Lancet DrumYou must first load the lancet drum into the lancing device to get it ready for use.Remove the cap.Insert a new lancet drum, whiteend first, until it clicks firmlyinto place.1Slide the cap on until it stops byaligning the notch on the capwith the notch on the lancingdevice.2You are now ready to use thefirst lancet.The lancet counter shows anumber 6, meaning you have6 new lancets remaining.3NOTEOnce the lancet drum is inserted into the lancing device, do not remove the lancet drum untilcompletely used. The lancet drum cannot be reused once it has been removed from the lancing device.WARNINGYou must not insert the lancet drum into the lancing device and simultaneously press the releasebutton or hold the lancing device with the release button resting on a surface such as a table top. Thiscould release a lancet and inadvertently cause injury.
