M 0492 - 31GB1 - TO CHANGE SUPPLY VOLTAGE(See recommended spare parts lists and power layout diagram)The balancing machine can run on 115 V - 50/60 Hz o 230V - 50/60Hz.To change the supply voltage, proceed as follows:1) Replace the motor,2) Replace the entire power board or else modify the board as follows:A) Replace the capacitor.B) Replace the two transformers.2 - CHECKING OF THE RIM DISTANCE GAUGECheck that the ruler used for measuring the DISTANCE of the wheels reads 200 mm as measurement ofthe distance from the adapter plane. If the graduated scale is changed, position it with the line indicating20 at the fixed limit (reading point) when the gauge tip coincides with the adapter plane.Reading point : 200 mm Adapter plane