www.accuenergy.comV: 1.05 Revised: June30AXM-WEB2 for Acuvim II Series Power Meter10. Web Interface Readings and Parameter SettingsThe AXM-WEB2 module supports the HTTPS protocol to allow for the use of a web interface. Theuser will need to access the AXM-WEB2 web interface to configure the module and use its func-tions. The web interface allows for remote initial setup of the Acuvim II meter.The AXM-WEB2 web interface allows for different user access levels.To access the web interface the IP address for the WEB2 either Ethernet 1, Ethernet 2 or a WiFi IPaddress must be known.10.1 User Access LoginEnter the correct IP address of the module in the search bar of the internet browser to ac-cess the web interface of the AXM-WEB2The user will be redirected to a web page prompting to select the Access Level and enterappropriate password for that level.TheUser level is ideal for users who need only to take readings and view status from themeter.The default password for the User level isview.It is recommended that no more than 5 users are logged in at the same time for this levelto ensure optimal performance of web interface.TheAdmin level is ideal for users who need access to configurations on the meter or theweb interface and to view readings.The default password for the Admin level isadmin.