AccuEnergy AcuREV20 Series Manual

AccuEnergy AcuREV20 Series Manual Manual pdf 1 page image

How to connect your Accuenergy AcuREV20XX meter to WatticsWattics Ltd | wattics.com | support@wattics.com | 1This post illustrates how to enable the automated transmission of meter readings from yourAccuenergy AcuREV20XX meters to the Wattics Energy Analytics Dashboard in nine easy steps.Accuenergy AcuREV20XX meters allow for automated data transmission via HTTP Post,meaning that once the meter is given internet access it can be configured to send data to Watticswithout the need of additional hardware requirements such as a gateway device. The set up toconfigure the meter to automatically push data to Wattics is extremely easy and can be carriedout in a few minutes following this step-by-step guide.STEP 1: Request a Meter ID from WatticsEach meter you wish to connect to Wattics requires a Meter ID as unique identifier. Unless yourmeter has been pre-configured already with a unique Meter ID, you must request a new Meter IDfrom Wattics via the Wattics Meter ID Request Form. One of our agents will be in touch shortly withyour new Meter ID needed to configure your meter.